Assalamualaikum Wr Wb
Cruess.... beberapa hari yang lalu aku stress banget karena pc di kantor ngadat gara – gara ada suatu file yang dideteksi virus.Dan virus itu ternyata harus di delete menggunakan “Save Mode”, trus harus pake user “Administrator” lagi..Nah yang bikin tambah jengkel lagi ternyata oh ternyata aku lupa password adminnya.Ya uda deh dengan rasa jengkel aku kepaksa ber goggling ria (aslinya aku paling ga suka ber goggling,coz itu pekerjaan yg menjemukan.Mending nanya alamatnya abis gitu download deh..hehehe)
Makanya kali aja lu lu pade ada yang pengen tau caranya meng-crack windows (NT,XP,2000),berikut aku kasih sedikit trik and tipsnya.Tetapi buat yang sudah tau ndak usah komen yakz?Ini cumin buat bantu yang lagi kebingunngan…
Ya uda yukz mulai ya….
******
Langkah pertama :
Download file crack windows yang berupa data zip di alamat situs berikut http://home.eunet.no/~pnordahl/ntpasswd/bd050303.zip, tapi buat yang koneksinya lemot atau lelet bin lambat bisa juga japri via ym di : “prof_pam” atau kirim e-mail ke : prof_pam@yahoo.com. Kemudian extract file tersebut ke hardisk (terserah taruh di folder apa aja).Trus siapin disket kosong di drive,lalu jalanin file “install.bat” dari hasil extract’an tadi.Jangan lupa arahin data hasil dari jalanin “install.bat” ke drive A atau disket.
Langkah kedua :
Reset pc yang akan di crack, tapi jangan lupa setting booting via disket.Supaya proses booting pertama mengenali disket yang telah diisi file crack windows tadi.Kemudian akan muncul :
========================================================
. Step ONE: Select disk where the Windows installation is =========================================================
Disks:
Disk /dev/ide/host0/bus0/target0/lun0/disc: 2147 MB, 2147483648 bytes
NT partitions found:
1 : /dev/ide/host0/bus0/target0/lun0/part1 2043MB Boot
Please select partition by number or
a = show all partitions,
d = automatically load new disk drivers
m = manually load new disk drivers l = relist NTFS/FAT partitions,
q = quit Select: [1]
Ketikkan angka “1” (satu) lalu tekan enter. Maka akan muncul tampilan berikut :
Mounting on /dev/ide/host0/bus0/target0/lun0/part1
NTFS volume version 3.1. Filesystem is: NTFS =========================================================
. Step TWO: Select PATH and registry files =========================================================
What is the path to the registry directory? (relative to windows disk) [windows/system32/config] :
Lalu tekan enter.Maka muncul tampilan berikut :
-r-------- 1 0 0 262144 Jan 12 18:01 SAM
-r-------- 1 0 0 262144 Jan 12 18:01 SECURITY
-r-------- 1 0 0 262144 Jan 12 18:01 default
-r-------- 1 0 0 8912896 Jan 12 18:01 software
-r-------- 1 0 0 2359296 Jan 12 18:01 system
dr-x------ 1 0 0 4096 Sep 8 11:37 systemprofile
-r-------- 1 0 0 262144 Sep 8 11:53 userdiff
Select which part of registry to load, use predefined choices
or list the files with space as delimiter
1 - Password reset [sam system security]
2 - RecoveryConsole parameters [software]
q - quit - return to previous [1] :
Ketikkan angka “1” (satu) lalu tekan enter. Maka akan muncul tampilan berikut :
========================================================
. Step THREE: Password or registry edit
=========================================================
chntpw version 0.99.2 040105, (c) Petter N Hagen
[.. some file info here ..]
* SAM policy limits:
Failed logins before lockout is: 0
Minimum password length : 0
Password history count : 0
<>========<> chntpw Main Interactive Menu <>========<>
Loaded hives: <sam> <system> <security>
1 - Edit user data and passwords
2 - Syskey status & change
3 - RecoveryConsole settings - - -
9 - Registry editor, now with full write support!
q - Quit (you will be asked if there is something to save)
What to do? [1] ->
Ketikkan angka “1” (satu) lalu tekan enter. Maka akan muncul tampilan berikut :
==== chntpw Edit User Info & Passwords ====
RID: 01f4, Username: <Administrator>
RID: 01f5, Username: <Guest>, *disabled or locked*
RID: 03e8, Username: <HelpAssistant>, *disabled or locked*
RID: 03eb, Username: <pnh>, *disabled or locked*
RID: 03ea, Username: <SUPPORT_388945a0>, *disabled or locked*
Select: ! - quit, . - list users, 0x<RID> - User with RID (hex)
or simply enter the username to change: [Administrator]
Lalu tekan enter maka akan muncul tampilan berikut :
RID : 0500 [01f4]
Username: Administrator
fullname:
comment : Built-in account for administering the computer/domain
homedir :
Account bits: 0x0210 =
[ ] Disabled [ ] Homedir req. [ ] Passwd not req.
[ ] Temp. duplicate [X] Normal account [ ] NMS account
[ ] Domain trust ac [ ] Wks trust act. [ ] Srv trust act
[X] Pwd don't expir [ ] Auto lockout [ ] (unknown 0x08)
[ ] (unknown 0x10) [ ] (unknown 0x20) [ ] (unknown 0x40)
Failed login count: 0, while max tries is: 0
Total login count: 3
* = blank the password (This may work better than setting a new password!)
Enter nothing to leave it unchanged
Please enter new password:
Kemudian masukkan password baru untuk Administrator,jika anda ingin mengosongi password silahkan ketikkan tanda * lalu tekan enter.Lalu tekan huruf “Y” kemudian enter.Maka akan muncul tampilan seperti ini :
Select: ! - quit, . - list users, 0x - User with RID (hex)
or simply enter the username to change: [Administrator] !
Tekan tanda seru ( ! )pada keyboard kemudian tekan enter.Maka muncul tampilan berikut :
<>========<> chntpw Main Interactive Menu <>========<>
Loaded hives:
1 - Edit user data and passwords
2 - Syskey status & change
3 - RecoveryConsole settings
- - -
9 - Registry editor, now with full write support!
q - Quit (you will be asked if there is something to save)
What to do? [1] ->
Pilih quit dengan cara tekan “q” lalu enter.Muncul tampilan berikut :
Hives that have changed:
# Name
0 - OK
=========================================================
. Step FOUR: Writing back changes
=========================================================
About to write file(s) back! Do it? [n] :
Tekan huruf “Y” lalu enter.Muncul tampilan berikut :
Writing sam
NOTE: A disk fixup will now be done.. it may take some time
Mounting volume... OK
Processing of $MFT and $MFTMirr completed successfully.
NTFS volume version is 3.1.
Setting required flags on partition... OK
Going to empty the journal ($LogFile)... OK
NTFS partition /dev/ide/host0/bus0/target0/lun0/part1 was processed
successfully.
NOTE: Windows will run a diskcheck (chkdsk) on next boot.
NOTE: this is to ensure disk intergity after the changes
***** EDIT COMPLETE *****
You can try again if it somehow failed, or you selected wrong
New run? [n] :
Tekan huruf “n” lalu enter.kemudian tekan CTRL + ALT + DEL (restart)
Jangan lupa disket crack keluarkan dari drive A jika lu akan melakukan restart.Setelah restart tunggu pc / windows proses otomatis untuk mengenali setting² yang sudah lu rubah.Setelah selesai maka masukkan user : Administrator; Password : (kosong).
Selamat mencoba…
Ciaowwww… mak cruessssss
::.. Cah Cuby ..::
baca selengkapnya..
